Tutorial: iPhone/iPad Stand

As promised here is the Tutorial to make a iPhone/iPad (or other electronic device) stand I posted last week.

iPhone Stand


  • Fabric 12″ x 9″
  • Cotton
  • 2-3 cups of rice
  • Pellon Ultra Firm 1 1/4″ x 5 3/4″
  • Polyester Fill
  1. Start with a piece of fabric that is 12″ x 9″. Fold in 1/2 and press (6″ x 9″  size once folded)Tutorial_Size
  2. Sew a 1/4 inch seam at the top, with a 1 – 1 1/2 ” gap, and the side of the folded fabric (refer to black lines).
  3. Fold the fabric so that the side seam is now in the middle at the back. The top will form triangles. I press the seam open for a flat appearance later.Sew along the bottom to form a 1/4 inch seam leaving a 1 – 11/2 inch gap (refer to black lines).
  4. Through one of the holes, feed the fabric through to invert fabric to show right side. Use a chop stick (or other device to ensure the corners are turned completely.
  5. Measure 3 inches from the bottom seam. Mark with chalk on each side (refer to where the chop stick is pointing). This will be the mark you will use to place the Pellon Ultra Firm Strip.
  6. Feed the Pellon Ultra Firm through the whole at the bottom.
  7. Move The Ultra Firm Strip into position with the top aligned with the chalk marks. Pin strip. Sew a border around the strip to ensure it remains in place (refer to black lines).
  8. Through the hole at the bottom, stuff with polyester filling until fill.
  9. Hand sew the bottom hole closed. I use a slip stitch to close my openings.
  10. For the main pillow, fill with rice. I use a Wilson piping bag to aid in adding the rice through the hole. NOTE: The rice will add a nice weight to the stand to make sure it will support the relevant electronic device.
  11. Fill as far as you can, approx. 3/4, or more, fill. You will have room at the top.
  12. Fill the rest of the space with the polyester filling.
  13. Hand stitch top opening close.  You now have a complete electronic stand.

My friends are loving these, so I hope your friends do to (or whoever you are gifting it to). If you have any questions or feedback let me know, leave a comment.

Update: I have had several people ask if they can use this also for an iPad. As mentioned in the title, we do use it for an iPad, which is usually used for Netflix/Videos. This means we typically have it in a horizontal position.
I would agree that this size stand would not work for an iPad if you were wanting to use vertically. I have not provided the measurements, if this is what you would like it for.

This tutorial is for personal use only.

Linking up with Amanda Jean @ Crazy Mom Quilts for Finish it up Friday.

84 thoughts on “Tutorial: iPhone/iPad Stand

    1. Sandra Bolser

      I cant thank you enough for the pattern and wonderful tutorial! I have enjoyed making mine and now making one for my daughter!

  1. Lynnet H

    Awesome directions and project! Made one up tonight and love it. I didn’t have the pelon ultra firm, but used plastic canvas instead. Increased the size slightly to accommodate my mini-iPad. Am in love with your design!!!

  2. Catherine

    I have a commercial pattern for this and the directions are horrid, and I’ve been sewing for 50+ years. Your tutorial saved the night…and the project. I needed a quick gift and sincerely appreciate you taking the time to post photos and instructions. Very grateful. ; )

  3. mamacatquilts

    I am making this as a belated Christmas gift, can’t wait to see it done. Thanks for taking the time to write up a thorough blog post, with pictures and everything!

  4. Pingback: Love you SO much I can barely stand it! | the green apricot

  5. Pingback: Soporte para móvil  | anaenlana

  6. Pingback: ToDo List: Phone/Tablet stand – Scrappy Taffy

  7. sophie

    My nan has set me the challenge to make one if these. I don’t understand what to do when you get to the bit with the corners or to make it into a triangle please help x

  8. Pingback: 28 Christmas Gifts for Moms Who Love to Read | Dodo Burd

  9. Pingback: You Fed Me Decaf? Episode 192 | The Weasley Sisters

  10. Maureen

    Thank you so much. I’ve been wanting to make some of these for gifts for family and some instructions are so involved. This is very straightforward and easy. Thanks again.

  11. Lisa

    This is a wonderful pattern. I only found one suggestion. The length of the pellon should be 5 1/2 inches. Other than that a great sew. Thanks for the tutorial.

  12. M Barber

    Thank you for taking the time to do this tutorial. Really clear and easy to follow. I have made several now for family members who have all found them useful.
    Kindest regards

  13. Jean Howard

    Please, what it Pelon? Is it a stiffener? Looking forward to making these for Christmas gifts for family. Thank you

  14. Pingback: Our Creative Souls – My Creative Corner3

  15. Di Bracey

    Thanks so much for this super pattern and tutorial. Brilliant, easy, quick, and works beautifully. Beaut gifts for friends and family.

  16. Luann

    I’m confused if I have a piece of fabric 12×9 and fold it in half that would be 6 x 4,5, Should it be 12 x18 to start? Thanks.

  17. Kathy

    Thanks for sharing. The instructions are perfect. I have made two of them. I have a lot of corn feed left from corn hole bags that i made. I used the corn feed instead of the rice and I used some poly fill at the top of the point. I am using one in my sewing room for my phone and a pin cushion. I will try to print out the instructions. Thanks again! They will make nice Christmas gifts.


Leave a Reply to Jean Howard Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s