Gypsy Wife QAL Final Link-up

GypsyWifeQALThroughout the year, we have been sewing up the Gypsy Wife blocks. Thank you so much to all the sponsors who supported us throughout the year. This month was the final month to pull it all together.
Pershing Block  IMG_1252I have to admit, this pattern was a challenge, and for me other things got in my way, so I am not sharing my finish this month. There have been great finishes already, and I have seen folks working hard to complete their final quilt.

hawthorne_threads_200_225So link-up your quilt top or complete quilt finish by the 9th January 2015 @ 6pm. I will randomly choose a winner who will win:

Click the button and add your blog or flickr link. Good Luck!!

Last minute Christmas gifts

A little while back, I had pinned this sewing project/tutorial for an electronic cable travel case (over on Pinterest). I had thought…hmm…maybe Christmas gifts for some of my work colleagues (I work for a large computer software company….so electronic cable case=perfect).

Finally, this weekend (2.5 days left of work for the year) I managed to get 3 done. I have to say, I had a blast sewing them,  mostly due to the great company on Sunday afternoon.
IMG_3087

A few friends (Sarah @ StitchingandBacon, Michelle @ UndiscoveredOptimist and Jenn pictured above; Daisy @ AntsToSugar and Becky pictured below) got together at Cary Quilting Company for a bit of last-minute Christmas sewing, sharing of fabric + Christmas baked goodies.

IMG_3089

The first pouch I made was using fabric from Frances Newcombe, Utopia (pictured below – Outside front, Outside back, Inside). I used a fantastic tutorial for these cases by LiveIt.LoveIt.MakeIt.

IMG_3082

I modified some aspects of the tutorial. First off, I needed to convert from cm to in. and here are the materials I used for my pouches (if in the US):

For the pouch pieces:  6″ (side) x 9″ (width) (4 pieces; 2 for the lining and 2 for the main)
For the Cable Tidy Section: 10″ (width) x 18″ (length) (2 pieces; one for the lining and one for the main)
Zipper: 9″ zipper was used for the pouch; purchased from Zipit
Elastic: 19″ length @ 0.5″ and 1″ wide (Joann’s)
Buckle: 2.5″ x 1″ Nickel Fashion Buckle (Joann’s)
Snaps: Size 2 Sew on Snaps (Joann’s)
Interfacing: Pellon Sf101 (fusible Shape flex) (from Joann’s – 30% off at the moment)

I replaced the felt with Fusible Fleece, specifically Pellon 987f Fusible Fleece (from Joann’s – 30% off at the moment).
IMG_3093
There are only a few construction pointers, I can provide extra to the provided tutorial.

  1. For sewing the zipper into the pouch, I added fabric tabs to the ends of my zipper for a nicer finish.
  2. I placed my elastic starting at 3″ from the top (0.5″ elastic) and 3″ from the bottom (1″ elastic).
  3. Pin, pin. pin the elastic, especially the smaller one on top. The smaller one tended to move more often when you sewing the straight lines and if you want a straight looking line of elastic you needed to pin.
  4. Draw and measure each line you are planning on sewing down through the elastic with a fabric marker. I used chalk pencil.
  5. I marked my lines starting with 2 x 2″ width and then alternated the 1.5″ and 1″ lines and finished off again with one or two 2″ segments. I recommend not placing two 1″ lines close to each other as it makes it difficult to fit items next to each other.

IMG_3094

The two on the left are for male colleagues and the one on the right was for a female colleague.

Lots of fun, and a project I would make again. It took me about 90 minutes for the first one, while I worked out all the steps. The other two, took 90 minutes combined, and I sewed more like a production line.

Fabrics for my pouches above were:

Your turn, you still have time to make those last-minute Christmas gifts!! Good Luck.

QDAD: Quilt Design a Day

Finally, caught up here  so here are the first weeks worth of designs for December. For the following designs, take a look at the library of associated palettes over on the Facebook page.

03 December: Out eating Sushi
This design originated from a pattern on the table at a sushi restaurant. I liked the lines and the blocks of the design.
QDAD_03Dec2014

04 December: Angled Architecture
Amy Gunson over @ Badskirt showed me a picture she had taken over of a building in Melbourne. There were these cool angles on the building which I isolated some of those designs into this one.
QDAD_04Dec2014

06 December: I Spy Window
What happens when you watch Return of the Jedi with your son, while doing quilt design a day? You see the circular window on the death star and it translates into this.
QDAD_06Dec2014

07 December: Pay Phone
This is the graphical presentation for the pay phone in the photo for inspiration.
QDAD_07Dec2014

08 December: Driftwood
This was the second design that represents driftwood, but I decided that this was my favorite of my driftwood interpretation.
QDAD_08Decmber
The first one, was this…I like that pink square with the lines, however I prefer the simple nature of just the bottom right corner.
Untitled

09 December: 60’s mod circles
Not a lot to say about this one – not really sure if I like this one.
QDAD_09Dec2014

10 December: Tudor Stripes
Inspired by Luis Sacilotto’s work, and really wanted to represent the Tudor black and white woodwork in a simple line design.QDAD_Tudor_10Dec

If you would like to make or use one of my designs, please email me (ml_wilkie(at)hotmail(dot)com) or leave a comment below. I am happy to talk with you on options and provide the relevant measurements etc. or have you test out a pattern. Also, if you use one of my designs, please use the following text to credit me the design: “Designed by Michelle Wilkie @ Factotum of Arts”.